- 75mm Steel Sliding Type Workstations
- 50mm Steel Sliding Type Workstations
The structural material used consists of cold rolled cold annealed steel. The frames are chromotised and then powder coated to a thickness of 50 microns. The frames are assembled in templates.
The frames are designed to carry networking / electrical cables both in the horizontal and vertical direction. The networking / electrical cables can also be routed between tiles if required. The frames rest on level adjusters. The frames are of standard heights to facilitate speedy delivery, though customized heights can be manufactured as specified by the architects / clients at an extra cost.
TRIMS & RACEWAYS:
Trims and raceways are made of Aluminum and undergo the same treatment process as the frame. Raceways are of hinged type, raceways for networking and electrical circuits are provided at two levels, with the specified minimum gap of 300mm maintained between them. One raceway is at the skirting level and the other is just below or above the tabletop as required. Cutouts to accommodate networking and electrical fascias are made as specified
Fabric / Laminate / Glass tile options are available. Fabric / Laminate tiles are made of imported MDF sheets. Fabric or Laminate is glued to machine cut MDF tiles. Fabric / Laminate tiles are slid to the frames using unbreakable plastic clips. This avoids usage of screws and facilitates easy maintenance. This also ensures that Electrical / Net working cables are not damaged while routing them between tiles. Glass tiles (clear, tinted or etched) can be provided as any panel in the frame. The material, shade and other specifications for fabric, laminate and glass tiles are as specified by the architects / clients.
The modular lab tables are of two types one is made of the aluminum extrusions and the other is made of mild Steel (CRCA), in the aluminum type, the skeleton of the tables made of aluminum sections and the tables are made of 25mm thick board which can be either edge binded or post formed, the lab tables with one power raceway and one Network Raceway.
In the case of steel tables the skeleton is made of 75 X 25 X 2mm CRCA rectangle tube, these tubes will have 5 X 19 rectangle slots for hooking the brackets the raceways, these tables are most suitable for heavy loads used in the R & D centers, lab’s etc.
We also provide antistatic solutions for the lab tables either by using ESD Laminate or ESD 3 layered mat with necessary accessories as ESD Wrist wrap, ESD grounding kit, ESD monitors etc.
Power coating finish: as per the customer requirement
Table Top finish: as per the customer requirement
The box structure for the kitchen Base unit, Wall unit and the Loft is made out of Commercial Ply/ Waterproof Ply of 18mm thick which will be firmly grouted to the floor/wall/ceiling. The exposed shutters and the outer body are made out of 18mm Membrane (MDF)/Laminate (PLY) finish. With World class Hinges (Ebco/Hettich)
The Membrane Shutters are made out of 18mm thick Fibre Board, Imported Foil is pressed on Cold/Hot press with world class adhesives. The foil used is 0.4mm thick and it is anti scratch, water resistant, fire resistant and termite proof, overall guaranteed product with good aesthetic profile design.
The Body and the Shutters can be of following combinations.
1. PLPB + Membrane :
The Entire body is made out of 18mm Pre Laminated Particle Board with the laminate finish and the Shutters are made of 18mm Membrane finished MDF boards. With world class hinges and hardware (Ebco/Hettich)
2. PLPB :
The Entire body is made out of 18mm Pre Laminated Particle Board with the laminate finish and also the Shutters are made of 18mm Pre Laminated Particle Board with the laminate finish. With world class hinges and hardware (Ebco/Hettich)
3. PLY + Membrane :
The Entire body is made out of 18mm PLY with laminate finish and the Shutters are made of 18mm Membrane finished MDF boards. With world class hinges and hardware (Ebco/Hettich)
4. PLY :
The Entire body is made out of 18mm PLY with Laminate finish and also the Shutters are made of 18mm Ply with laminate finish. With world class hinges and hardware (Ebco/Hettich)
DESARA DESIGN PVT LTD is your partner to strike the perfect balance between style and substance. We work closely with architects to create interiors that inspire by combining design, new age materials, ergonomics and value for money.
Inspiring ambience and impressive design are what we deliver during the design and project execution of commercial interiors. Every project that is entrusted with Desara Design benefits from the comprehensive range of services that we bring to the table.
These are also called as server racks or 19” rack sued is networking lab used to mount the servers and networking instruments. This rack is made of 3mm thick CRCA powder coated.
Under Table Drawers:
These under table drawers will have 2 equal drawers on top and one filling drawer at the bottom and the whole unit is mounted on castors with brake.
Key Board Trays:
i) Wooden ii) Metal iii) Plastic
Running Counter/Free Standing Table
These tables are also used in lab’s and testing centers, this will have only working top at an weight of 2’6” from the floor, the table top’s are on the steel frame (25 X 50 X 2mm CRCA powder coated). This table can also external power and network raceways.
Size available: Width: 3’, 4’, 6’, 8’
Depth: 1.5’, 2’, 2.5’
These are similar to the free standing table, except that they are mounted on castors, these trolleys can be either with MS trays or wooden shelf’s.
Size available: Width: 3’, 3’, 3.5”
Depth: 2’, 3’, 3.5”